To ensure successful application and longevity of your brand new decal, please follow our step by step guide.
Step 1:
Clean the application area with soapy water and dry with a clean microfibre cloth. Do not use glass cleaner as it will prevent the sticker from adhering.
Step 2:
Place the decal face down on a flat surface (white side up). Using a credit card or similar object, rub back and forth on the transfer tape. Continue for approximately 15 seconds and cover the entire area of the design. This ensures that the sticker will cling to the transfer tape, whilst also removing any air bubbles.
Step 3:
Peel the backing paper (white side) off the decal. If any part of the sticker remains on the backing paper, stop the removal, carefully replace and repeat step 2. Use a firm rubbing action.
Step 4:
Spray the clean application surface with a soapy water mixture and leave it wet. Line up the sticker in your preferred position and slowly lower it onto the surface. Due to the wet surface, you will be able to freely move your sticker around - so don’t stress if your first spot isn’t quite right! Once you are happy with the positioning, firmly rub across the sticker with your credit card or similar to remove the liquid and air bubbles. For best results, allow the area to dry completely before moving on; we suggest 24 hours.
Step 5:
Once completely dry, carefully peel the clear transfer tape off at a 45 degree angle. Pay close attention that no part of the sticker remains stuck to the transfer tape. If this happens, replace the transfer tape and re-rub with your credit card.
If you have any questions or concerns, please contact us via contact@gamingaustralia.com.au.
